Amateur Extra Question E6C07
E6C: Digital ICs: families of digital ICs; gates; programmable logic devices
What best describes a pull-up or pull-down resistor?
- A resistor in a keying circuit used to reduce key clicks
- A resistor connected to the positive or negative supply used to establish a voltage when an input or output is an open circuit (correct answer)
- A resistor that ensures that an oscillator frequency does not drift
- A resistor connected to an op-amp output that prevents signals from exceeding the power supply voltage
Correct answer: B, A resistor connected to the positive or negative supply used to establish a voltage when an input or output is an open circuit
Explanation
An unconnected (floating) logic input can drift and pick up noise, causing random switching. A pull-up resistor to the positive supply holds the line high when nothing drives it, and a pull-down resistor to ground or the negative supply holds it low. Its value, often around 10 kΩ, is high enough that an active driver can easily override it. Pull-ups also supply the high level for open-collector and open-drain outputs.
Why the other answers are wrong
- A, A resistor in a keying circuit used to reduce key clicks: Key clicks are reduced by shaping the rise and fall of the keyed waveform, not by a resistor that sets a default logic level.
- C, A resistor that ensures that an oscillator frequency does not drift: Oscillator drift is controlled with stable components, temperature compensation and regulated supplies, not pull-up resistors.
- D, A resistor connected to an op-amp output that prevents signals from exceeding the power supply voltage: An op-amp output can't swing beyond its supply rails anyway, and a resistor used to limit or clamp a signal isn't a pull-up.