Amateur Extra Question E6D12
E6D: Inductors and piezoelectricity: permeability, core material and configuration; transformers; piezoelectric devices
What causes inductor saturation?
- Operation at too high a frequency
- Selecting a core with low permeability
- Operation at excessive magnetic flux (correct answer)
- Selecting a core with excessive permittivity
Correct answer: C, Operation at excessive magnetic flux
Explanation
A magnetic core can only hold so much flux. As current, and with it flux density, rises past a certain point, the core's magnetic domains are all aligned and its permeability collapses. Inductance then drops sharply and the current waveform distorts. Large DC bias or large signal currents cause this, which is why core material and size must suit the expected flux.
Why the other answers are wrong
- A, Operation at too high a frequency: Too high a frequency causes extra core loss and heating, not saturation, which is set by flux density.
- B, Selecting a core with low permeability: Low-permeability cores such as powdered iron actually tolerate more ampere-turns before saturating than high-permeability ferrites do.
- D, Selecting a core with excessive permittivity: Permittivity is an electric-field (dielectric) property; saturation is a magnetic effect governed by flux and permeability.