Amateur Extra Question E6E05
E6E: Semiconductor materials and packages for RF use
Which of the following noise figure values is typical of a low-noise UHF preamplifier?
- 0.5 dB (correct answer)
- -10 dB
- 44 dBm
- -20 dBm
Correct answer: A, 0.5 dB
Explanation
Noise figure compares a stage's input signal-to-noise ratio with its output SNR: NF = 10 log (SNR in / SNR out), in dB. Every real amplifier adds some noise of its own, so SNR gets worse through the stage and NF sits above the ideal 0 dB. Good GaAs FET and HEMT preamplifiers for UHF reach about 0.5 dB. The lower the figure, the weaker the signals the receiver can hear.
Why the other answers are wrong
- B, -10 dB: A noise figure cannot be negative, because an amplifier adds noise and cannot improve the signal-to-noise ratio; 0 dB is the theoretical minimum.
- C, 44 dBm: dBm is a unit of absolute power referenced to 1 mW, not a noise figure, and 44 dBm is about 25 W of power.
- D, -20 dBm: dBm measures absolute power, not noise figure, and a negative noise figure is impossible in any case.