Amateur Extra Question E7C11
E7C: Filters and matching networks: types of networks; types of filters; filter applications; filter characteristics; impedance matching
Which of the following measures a filter’s ability to reject signals in adjacent channels?
- Passband ripple
- Phase response
- Shape factor (correct answer)
- Noise factor
Correct answer: C, Shape factor
Explanation
Shape factor compares a filter's bandwidth far down its skirts with its bandwidth near the top, for example the 60 dB bandwidth divided by the 6 dB bandwidth. A value close to 1 means steep skirts: signals just outside the passband, such as those in an adjacent channel, are cut sharply. A larger value means the response slopes gradually and lets nearby signals through.
Why the other answers are wrong
- A, Passband ripple: Passband ripple is the variation in gain inside the passband. It says nothing about how quickly the response falls off outside it.
- B, Phase response: Phase response describes how phase shift varies with frequency, which affects delay and pulse distortion, not attenuation of nearby signals.
- D, Noise factor: Noise factor measures how much noise a circuit adds to a signal. It is a receiver sensitivity figure, not a selectivity figure.