Amateur Extra Question E7D15
E7D: Power supplies and voltage regulators; solar array charge controllers
What is the purpose of a step-start circuit in a high-voltage power supply?
- To provide a dual-voltage output for reduced power applications
- To compensate for variations of the incoming line voltage
- To prevent arcing across the input power switch or relay contacts
- To allow the filter capacitors to charge gradually (correct answer)
Correct answer: D, To allow the filter capacitors to charge gradually
Explanation
Large, discharged filter capacitors look almost like a short circuit at turn-on, causing a huge inrush current that can damage rectifiers, the transformer and fuses. A step-start circuit first places a resistor in series to limit that current while the capacitors charge gradually. A relay or timer then shorts the resistor out for normal operation.
Why the other answers are wrong
- A, To provide a dual-voltage output for reduced power applications: A step-start circuit does not produce two output voltages; it only limits inrush current at turn-on.
- B, To compensate for variations of the incoming line voltage: Compensating for line voltage changes is the job of a regulator, not a turn-on surge limiter.
- C, To prevent arcing across the input power switch or relay contacts: Its purpose is limiting the inrush current that charges the capacitors, not suppressing arcs at switch or relay contacts.