Amateur Extra Question E7E04
E7E: Modulation and demodulation: reactance, phase, and balanced modulators; detectors; mixers
What is one way to produce a single-sideband phone signal?
- Use a balanced modulator followed by a filter (correct answer)
- Use a reactance modulator followed by a mixer
- Use a loop modulator followed by a mixer
- Use a product detector with a DSB signal
Correct answer: A, Use a balanced modulator followed by a filter
Explanation
A balanced modulator combines the audio with a carrier so that both sidebands appear at the output while the carrier itself cancels. The result is a double-sideband suppressed-carrier signal. A sharp crystal or mechanical filter then passes one sideband and rejects the other, which leaves SSB. This is the classic filter method. The phasing method is the main alternative.
Why the other answers are wrong
- B, Use a reactance modulator followed by a mixer: A reactance modulator varies an oscillator's tuning to make FM or PM, and a following mixer only shifts frequency; neither removes a sideband or the carrier.
- C, Use a loop modulator followed by a mixer: A loop modulator is not a recognized SSB stage, and a mixer only translates frequency without suppressing the carrier or the unwanted sideband.
- D, Use a product detector with a DSB signal: A product detector is a receiver circuit that recovers audio from SSB or CW; it demodulates and cannot create an SSB signal from DSB.