Amateur Extra Question E7E09
E7E: Modulation and demodulation: reactance, phase, and balanced modulators; detectors; mixers
What occurs when the input signal levels to a mixer are too high?
- Spurious mixer products are generated (correct answer)
- Mixer blanking occurs
- Automatic limiting occurs
- Excessive AGC voltage levels are generated
Correct answer: A, Spurious mixer products are generated
Explanation
A mixer is designed to work within a limited range of signal levels. Overdriving it pushes the devices into strongly nonlinear operation. This generates extra harmonics and intermodulation products, such as 2f1 - f2, beyond the wanted sum and difference. These unwanted spurious products can show up as false signals, birdies, or interference to nearby channels.
Why the other answers are wrong
- B, Mixer blanking occurs: Mixer blanking is not a real effect; blanking is done by a separate noise blanker circuit that gates out pulse noise.
- C, Automatic limiting occurs: Limiting is a deliberate function of an FM limiter stage; an overloaded mixer distorts and creates spurs rather than cleanly limiting.
- D, Excessive AGC voltage levels are generated: AGC voltage is derived later from the IF or detector signal level; the defining problem of mixer overload is spurious output, not AGC voltage.