Amateur Extra Question E7F01
E7F: Software defined radio fundamentals: digital signal processing (DSP) filtering, modulation, and demodulation; analog-digital conversion; digital filters
What is meant by “direct sampling” in software defined radios?
- Software is converted from source code to object code during operation of the receiver
- I and Q signals are generated by digital processing without the use of RF amplification
- Incoming RF is digitized by an analog-to-digital converter without being mixed with a local oscillator signal (correct answer)
- A switching mixer is used to generate I and Q signals directly from the RF input
Correct answer: C, Incoming RF is digitized by an analog-to-digital converter without being mixed with a local oscillator signal
Explanation
A direct-sampling SDR feeds antenna RF, after band filtering and perhaps a preamp, straight into a fast analog-to-digital converter; no local oscillator or mixer shifts it to a lower frequency first. Tuning, filtering and demodulation all happen digitally. The simplest design samples above twice the highest received frequency; with a bandpass filter ahead of the ADC, undersampling can also reach higher Nyquist zones.
Why the other answers are wrong
- A, Software is converted from source code to object code during operation of the receiver: Compiling source code into object code is a software build step, not a receiver architecture; it has nothing to do with how RF is sampled.
- B, I and Q signals are generated by digital processing without the use of RF amplification: Direct sampling does not mean omitting RF amplification, since many such receivers use a preamp; the defining feature is that no mixer precedes the ADC.
- D, A switching mixer is used to generate I and Q signals directly from the RF input: A switching mixer that produces I and Q from the RF input is a quadrature sampling detector, which is a mixing architecture rather than direct sampling.