Amateur Extra Question E7F05
E7F: Software defined radio fundamentals: digital signal processing (DSP) filtering, modulation, and demodulation; analog-digital conversion; digital filters
How frequently must an analog signal be sampled to be accurately reproduced?
- At least half the rate of the highest frequency component of the signal
- At least twice the rate of the highest frequency component of the signal (correct answer)
- At the same rate as the highest frequency component of the signal
- At four times the rate of the highest frequency component of the signal
Correct answer: B, At least twice the rate of the highest frequency component of the signal
Explanation
The Nyquist criterion says the sample rate must be at least twice the highest frequency component: fs ≥ 2 x fmax. For example, audio extending to 3 kHz needs at least 6 kHz sampling. Below this rate, high frequencies fold back as false lower-frequency aliases that cannot be removed afterward. This is why an anti-aliasing low-pass filter is placed ahead of the ADC.
Why the other answers are wrong
- A, At least half the rate of the highest frequency component of the signal: Sampling at half the highest frequency is far too slow; the signal would be badly aliased and could not be reconstructed.
- C, At the same rate as the highest frequency component of the signal: Sampling once per cycle of the highest frequency captures the same point each cycle, so that component looks like DC or a false low frequency.
- D, At four times the rate of the highest frequency component of the signal: Four times the highest frequency works and is sometimes used in practice, but it is more than the minimum the sampling theorem requires.