Amateur Extra Question E7F09
E7F: Software defined radio fundamentals: digital signal processing (DSP) filtering, modulation, and demodulation; analog-digital conversion; digital filters
Why is an anti-aliasing filter required in a decimator?
- It removes high-frequency signal components that would otherwise be reproduced as lower frequency components (correct answer)
- It peaks the response of the decimator, improving bandwidth
- It removes low-frequency signal components to eliminate the need for DC restoration
- It notches out the sampling frequency to avoid sampling errors
Correct answer: A, It removes high-frequency signal components that would otherwise be reproduced as lower frequency components
Explanation
Decimation lowers the sample rate by discarding samples, so the Nyquist limit (half the new sample rate) also drops. Any signal above that new limit would fold back and appear as a false lower-frequency signal (aliasing). A low-pass anti-aliasing filter must remove those components before the samples are discarded. Once aliased, they cannot be separated from real signals.
Why the other answers are wrong
- B, It peaks the response of the decimator, improving bandwidth: An anti-aliasing filter is a low-pass filter that limits bandwidth; it does not peak the response, and decimation narrows bandwidth rather than improving it.
- C, It removes low-frequency signal components to eliminate the need for DC restoration: Aliasing comes from components above the new Nyquist limit, not from low frequencies, and DC restoration has nothing to do with decimation.
- D, It notches out the sampling frequency to avoid sampling errors: The filter is a low-pass that removes everything above half the new sample rate, not a notch at the sampling frequency.