Amateur Extra Question E7F11
E7F: Software defined radio fundamentals: digital signal processing (DSP) filtering, modulation, and demodulation; analog-digital conversion; digital filters
What sets the minimum detectable signal level for a direct-sampling software defined receiver in the absence of atmospheric or thermal noise?
- Sample clock phase noise
- Reference voltage level and sample width in bits (correct answer)
- Data storage transfer rate
- Missing codes and jitter
Correct answer: B, Reference voltage level and sample width in bits
Explanation
The smallest change an ADC can register is one least significant bit: the reference voltage divided by 2^N, where N is the sample width in bits. For example, 2 V / 2^16 = 2 V / 65,536 ≈ 30.5 µV. With no outside noise, a signal smaller than one step produces no change in the output code. Raising the bit count or lowering the reference voltage makes the steps smaller.
Why the other answers are wrong
- A, Sample clock phase noise: Sample clock phase noise causes reciprocal mixing and raises the noise floor near strong signals; it does not set the basic quantization step.
- C, Data storage transfer rate: Data storage or transfer rate limits how much sampled data can be moved, not the voltage resolution of each sample.
- D, Missing codes and jitter: Missing codes and jitter are ADC imperfections that add distortion or noise; the fundamental resolution still comes from reference voltage and bit count.