Amateur Extra Question E7G02
E7G: Operational amplifiers: characteristics and applications
What is the frequency response of the circuit in E7-3 if a capacitor is added across the feedback resistor?
- High-pass filter
- Low-pass filter (correct answer)
- Band-pass filter
- Notch filter
Correct answer: B, Low-pass filter
Explanation
Figure E7-3 is an inverting amplifier with gain −RF/R1. A capacitor across RF makes the feedback impedance fall as frequency rises, since XC = 1/(2πfC). At low frequencies the capacitor has little effect and the gain is −RF/R1. At high frequencies it shunts RF, the gain drops, and the circuit becomes an active low-pass filter with a corner near f = 1/(2πRFC).
Why the other answers are wrong
- A, High-pass filter: A high-pass response would need a capacitor in series with the input resistor, not across the feedback resistor.
- C, Band-pass filter: A single capacitor across RF produces only one rolloff; a band-pass needs both a low-frequency and a high-frequency rolloff.
- D, Notch filter: A notch requires a frequency-specific rejection network, such as a twin-T, not a single capacitor across the feedback resistor.