Amateur Extra Question E7H07
E7H: Oscillators and signal sources: types of oscillators; synthesizers and phase-locked loops; direct digital synthesizers; stabilizing thermal drift; microphonics; high-accuracy oscillators
How can an oscillator’s microphonic responses be reduced?
- Use NP0 capacitors
- Reduce noise on the oscillator’s power supply
- Increase the gain
- Mechanically isolate the oscillator circuitry from its enclosure (correct answer)
Correct answer: D, Mechanically isolate the oscillator circuitry from its enclosure
Explanation
A microphonic response is a frequency shift caused by vibration or shock. The mechanical movement slightly flexes components and wiring, which changes their capacitance or inductance and so modulates the oscillator. Mechanically isolating the circuitry from the enclosure keeps vibration from reaching the frequency-determining parts. Shock mounts, rigid construction and short, firmly anchored leads all help.
Why the other answers are wrong
- A, Use NP0 capacitors: NP0 capacitors have near-zero temperature coefficient and fight thermal drift, not vibration-induced frequency shifts.
- B, Reduce noise on the oscillator’s power supply: Supply noise causes electrical noise or modulation, but microphonics come from mechanical vibration, which a cleaner supply doesn't stop.
- C, Increase the gain: Raising gain does nothing about the mechanical sensitivity of tuned components and can worsen noise or stability.