Amateur Extra Question E7H12
E7H: Oscillators and signal sources: types of oscillators; synthesizers and phase-locked loops; direct digital synthesizers; stabilizing thermal drift; microphonics; high-accuracy oscillators
Which of the following ensures that a crystal oscillator operates on the frequency specified by the crystal manufacturer?
- Provide the crystal with a specified parallel inductance
- Provide the crystal with a specified parallel capacitance (correct answer)
- Bias the crystal at a specified voltage
- Bias the crystal at a specified current
Correct answer: B, Provide the crystal with a specified parallel capacitance
Explanation
A parallel-mode crystal is calibrated to oscillate at its marked frequency only when the circuit presents a specific load capacitance across it, such as 18 pF or 32 pF. That capacitance is part of the resonant circuit, so a different value pulls the frequency away from the marked figure. Designers match the specified load, and often add a small trimmer capacitor to set the frequency exactly.
Why the other answers are wrong
- A, Provide the crystal with a specified parallel inductance: Crystals are specified with a load capacitance, not an inductance; a parallel inductor is not how the marked frequency is achieved.
- C, Bias the crystal at a specified voltage: A quartz crystal is a passive resonator, not a biased semiconductor; bias voltage sets the active device's operating point, not the crystal frequency.
- D, Bias the crystal at a specified current: Crystals aren't biased with current; drive level matters for aging and damage, but the calibrated frequency depends on the specified load capacitance.