Amateur Extra Question E9E06
E9E: Impedance matching: matching antennas to feed lines; phasing lines; power dividers
Which of these transmission line impedances would be suitable for constructing a quarter-wave Q-section for matching a 100-ohm feed point impedance to a 50-ohm transmission line?
- 50 ohms
- 62 ohms
- 75 ohms (correct answer)
- 90 ohms
Correct answer: C, 75 ohms
Explanation
A quarter-wave Q-section needs a line whose impedance is the geometric mean of the two impedances being matched. Z0 = √(Zin × Zload) = √(50 Ω × 100 Ω) = √5000 ≈ 70.7 Ω. Common 75 Ω coax is the closest choice. It transforms 100 Ω to 75²/100 ≈ 56 Ω, which gives an SWR of only about 1.1:1.
Why the other answers are wrong
- A, 50 ohms: A 50 Ω quarter-wave section transforms 100 Ω to 50²/100 = 25 Ω, which is a 2:1 mismatch instead of a match.
- B, 62 ohms: A 62 Ω section transforms 100 Ω to 62²/100 ≈ 38 Ω, which misses the 70.7 Ω geometric-mean requirement by more than 75 Ω does.
- D, 90 ohms: A 90 Ω section transforms 100 Ω to 90²/100 = 81 Ω, which is too high and leaves about a 1.6:1 mismatch on the 50 Ω line.