Amateur Extra Question E9E11
E9E: Impedance matching: matching antennas to feed lines; phasing lines; power dividers
What is the purpose of using multiple driven elements connected through phasing lines?
- To control the antenna’s radiation pattern (correct answer)
- To prevent harmonic radiation from the transmitter
- To allow single-band antennas to operate on other bands
- To create a low-angle radiation pattern
Correct answer: A, To control the antenna’s radiation pattern
Explanation
Phasing lines set the relative amplitude and phase of current in each driven element. The fields from the elements then add in some directions and cancel in others. By choosing the spacing and phase delay, you can shape the radiation pattern into broadside, end-fire, cardioid, or switchable directional patterns. This is the basis of phased verticals and similar arrays.
Why the other answers are wrong
- B, To prevent harmonic radiation from the transmitter: Harmonic radiation is suppressed with low-pass filters and good transmitter design; phasing elements does not remove harmonics.
- C, To allow single-band antennas to operate on other bands: Operating single-band antennas on other bands needs traps or an antenna tuner; phasing lines are cut for one band and work properly only there.
- D, To create a low-angle radiation pattern: Low-angle radiation depends mainly on height and ground; phasing shapes the pattern generally and is not limited to lowering the angle.