Amateur Extra Question E9H01
E9H: Receiving antennas: radio direction finding (RDF) techniques; Beverage antennas; single- and multiple-turn loops
When constructing a Beverage antenna, which of the following factors should be included in the design to achieve good performance at the desired frequency?
- Its overall length must not exceed 1/4 wavelength
- It must be mounted more than 1 wavelength above ground
- It should be configured as a four-sided loop
- It should be at least one wavelength long (correct answer)
Correct answer: D, It should be at least one wavelength long
Explanation
A Beverage is a long, low wire that runs toward the desired direction, usually terminated through a resistor to ground. Its directivity comes from the traveling wave building up along the wire. It needs to be at least one wavelength long, and longer is better, to give a useful pattern. On 160 m that means hundreds of feet of wire.
Why the other answers are wrong
- A, Its overall length must not exceed 1/4 wavelength: A quarter wave is far too short; a Beverage's directivity grows with length, so it needs a wavelength or more.
- B, It must be mounted more than 1 wavelength above ground: Beverages are mounted low, typically a few feet to about 10 feet above ground, not a wavelength high.
- C, It should be configured as a four-sided loop: A Beverage is a single long straight wire, not a loop; loop receiving antennas are a different design.