Amateur Extra Question E9H04
E9H: Receiving antennas: radio direction finding (RDF) techniques; Beverage antennas; single- and multiple-turn loops
What is the purpose of placing an electrostatic shield around a small-loop direction-finding antenna?
- It adds capacitive loading, increasing the bandwidth of the antenna
- It eliminates unbalanced capacitive coupling to the antenna’s surroundings, improving the depth of its nulls (correct answer)
- It eliminates tracking errors caused by strong out-of-band signals
- It increases signal strength by providing a better match to the feed line
Correct answer: B, It eliminates unbalanced capacitive coupling to the antenna’s surroundings, improving the depth of its nulls
Explanation
A small DF loop should respond only to the magnetic field of a wave, and its two sides should be perfectly balanced. Stray capacitance between the loop and nearby objects or the operator unbalances it, so it also picks up the electric field like a small vertical whip (the 'antenna effect'). That pickup fills in the nulls. A grounded electrostatic shield, gapped so it isn't a shorted turn, blocks this coupling and keeps the nulls deep and sharp.
Why the other answers are wrong
- A, It adds capacitive loading, increasing the bandwidth of the antenna: The shield isn't there to add capacitive loading or widen bandwidth; its job is to block electric-field pickup so the loop stays balanced.
- C, It eliminates tracking errors caused by strong out-of-band signals: Strong out-of-band signals are handled with filtering and receiver selectivity, not an electrostatic shield, which deals with capacitive coupling.
- D, It increases signal strength by providing a better match to the feed line: The shield doesn't improve feed line matching or raise signal level; it actually reduces unwanted pickup to deepen the nulls.