Amateur Extra Question E9H10
E9H: Receiving antennas: radio direction finding (RDF) techniques; Beverage antennas; single- and multiple-turn loops
How can the output voltage of a multiple-turn receiving loop antenna be increased?
- By reducing the permeability of the loop shield
- By utilizing high impedance wire for the coupling loop
- By increasing the number of turns and/or the area enclosed by the loop (correct answer)
- All these choices are correct
Correct answer: C, By increasing the number of turns and/or the area enclosed by the loop
Explanation
By Faraday's law, the voltage induced in a loop is proportional to the rate of change of magnetic flux through each turn, times the number of turns. Flux grows with the enclosed area, so output voltage rises in proportion to N x A. Adding turns, enlarging the loop, or both, raises the signal voltage the loop delivers.
Why the other answers are wrong
- A, By reducing the permeability of the loop shield: A loop shield is normally nonmagnetic, and lowering its permeability doesn't increase flux through the turns or the induced voltage.
- B, By utilizing high impedance wire for the coupling loop: 'High impedance wire' is not a meaningful way to raise induced voltage; the coupling loop's job is impedance matching, not adding output.
- D, All these choices are correct: Only more turns or more area actually increases output voltage; the other two methods are invalid, so not all choices are correct.