General Question G0B13
G0B: Station safety: electrical shock, grounding, fusing, interlocks, and wiring; antenna and tower safety
Where should lightning arrestors be located?
- Where the feed lines enter the building (correct answer)
- On the antenna, opposite the feed point
- In series with each ground lead
- At the closest power pole ground electrode
Correct answer: A, Where the feed lines enter the building
Explanation
Lightning arrestors belong where feed lines enter the building, usually on an entry panel bonded to the station's single-point ground. At that spot, surge energy is sent to ground before it can come indoors and reach the radios or people.
Why the other answers are wrong
- B, On the antenna, opposite the feed point: Placing an arrestor on the antenna opposite the feed point does nothing to stop a surge traveling down the feed line into the building.
- C, In series with each ground lead: An arrestor wired in series with a ground lead would interrupt the ground path; arrestors go between the feed line and ground.
- D, At the closest power pole ground electrode: Arrestors protect the station's own feed lines at the point of entry; the utility's power pole ground is not where they belong.