General Question G1A10
G1A: General class control operator frequency privileges; primary and secondary allocations
What portion of the 10-meter band is available for repeater use?
- The entire band
- The portion between 28.1 MHz and 28.2 MHz
- The portion between 28.3 MHz and 28.5 MHz
- The portion above 29.5 MHz (correct answer)
Correct answer: D, The portion above 29.5 MHz
Explanation
Section 97.205(b) allows repeaters on the 10-meter and shorter bands, but excludes certain segments, including 28.0-29.5 MHz. That leaves only 29.5-29.7 MHz for 10-meter repeaters. This is where FM repeater outputs such as 29.620 MHz are found.
Why the other answers are wrong
- A, The entire band: The rule specifically excludes 28.0-29.5 MHz from repeater use, so most of the 10-meter band is closed to repeaters.
- B, The portion between 28.1 MHz and 28.2 MHz: 28.1-28.2 MHz lies inside the excluded 28.0-29.5 MHz segment; that area is used for RTTY and data, not repeaters.
- C, The portion between 28.3 MHz and 28.5 MHz: 28.3-28.5 MHz is inside the excluded 28.0-29.5 MHz range; it is a busy SSB phone segment, not a repeater allocation.
Rule: §97.205(b)