General Question G1B09
G1B: Antenna structure limitations; good engineering and good amateur practice; beacon operation; prohibited transmissions; retransmitting radio signals
On what HF frequencies are automatically controlled beacons permitted?
- On any frequency if power is less than 1 watt
- On any frequency if transmissions are in Morse code
- 21.08 MHz to 21.09 MHz
- 28.20 MHz to 28.30 MHz (correct answer)
Correct answer: D, 28.20 MHz to 28.30 MHz
Explanation
Section 97.203(d) allows a beacon to be automatically controlled only in specific segments, and the only HF one is 28.20-28.30 MHz on 10 m. The others are on 6 m, 2 m, 1.25 m, 70 cm, and the 33 cm and shorter bands. Outside these segments, a beacon needs a control operator at a control point.
Why the other answers are wrong
- A, On any frequency if power is less than 1 watt: Low power doesn't allow automatic control anywhere; the rule ties unattended beacon operation to listed segments regardless of power.
- B, On any frequency if transmissions are in Morse code: The mode isn't the test; even a Morse code beacon may run under automatic control only in the listed segments, such as 28.20-28.30 MHz.
- C, 21.08 MHz to 21.09 MHz: 21.08-21.09 MHz isn't a beacon segment; the nearby 21.090-21.100 MHz segment in Section 97.221 is for automatically controlled digital stations, not beacons.
Rule: §97.203(d)