General Question G1E03
G1E: Control categories; repeater regulations; third-party rules; ITU regions; automatically controlled digital station
What is required to conduct communications with a digital station operating under automatic control outside the automatic control band segments?
- The station initiating the contact must be under local or remote control (correct answer)
- The interrogating transmission must be made by another automatically controlled station
- No third-party traffic may be transmitted
- The control operator of the interrogating station must hold an Amateur Extra class license
Correct answer: A, The station initiating the contact must be under local or remote control
Explanation
Section 97.221(c) allows a station to send RTTY or data under automatic control outside the listed automatic segments only under two conditions. It must be responding to interrogation by a station under local or remote control. Its transmissions must also occupy no more than 500 Hz. This ensures a human control operator is supervising one end of every exchange.
Why the other answers are wrong
- B, The interrogating transmission must be made by another automatically controlled station: That is backward: two automatically controlled stations exchanging traffic outside the designated segments is exactly what the rule is meant to prevent.
- C, No third-party traffic may be transmitted: Section 97.115(c) actually allows automatically controlled stations to pass third-party traffic when they use RTTY or data emissions.
- D, The control operator of the interrogating station must hold an Amateur Extra class license: The rule sets no license-class condition; any control operator with privileges on that frequency may interrogate the station.
Rule: §97.221