General Question G2A06
G2A: Phone operating procedures: USB/LSB conventions, breaking into a contact, transmitter setup for voice operation; answering DX stations
Which of the following is an advantage of using single sideband, as compared to other analog voice modes on the HF amateur bands?
- Very high-fidelity voice modulation
- Less subject to interference from atmospheric static crashes
- Ease of tuning on receive and immunity to impulse noise
- Less bandwidth used and greater power efficiency (correct answer)
Correct answer: D, Less bandwidth used and greater power efficiency
Explanation
SSB drops the carrier and one redundant sideband, so a voice signal needs only about 3 kHz instead of the 6 kHz or so of AM. The transmitter puts out power only when you speak, and all of it goes into the one information-carrying sideband. That makes SSB narrower and more power-efficient than other analog voice modes.
Why the other answers are wrong
- A, Very high-fidelity voice modulation: SSB's audio is deliberately narrow (about 300-3000 Hz), so it gives communications-quality voice, not high fidelity.
- B, Less subject to interference from atmospheric static crashes: Like AM, SSB is amplitude-based and is fully affected by static crashes; FM is the mode that rejects amplitude noise.
- C, Ease of tuning on receive and immunity to impulse noise: SSB is actually fussy to tune, since a slight mistune makes voices sound shifted, and it has no special immunity to impulse noise.