General Question G2A12
G2A: Phone operating procedures: USB/LSB conventions, breaking into a contact, transmitter setup for voice operation; answering DX stations
What control is typically adjusted for proper ALC setting on a single sideband transceiver?
- RF clipping level
- Transmit audio or microphone gain (correct answer)
- Antenna inductance or capacitance
- Attenuator level
Correct answer: B, Transmit audio or microphone gain
Explanation
Automatic level control (ALC) reduces transmitter drive when the audio input is pushing the stages too hard. You set it by adjusting transmit audio, or microphone gain, while talking and watching the ALC meter. Keep the meter within the range the manual recommends. Too much mic gain causes heavy ALC action, which brings distortion and splatter onto adjacent frequencies.
Why the other answers are wrong
- A, RF clipping level: RF clipping (speech processing) changes average power and punch. ALC is set mainly with the audio drive level that feeds the transmitter.
- C, Antenna inductance or capacitance: Inductance and capacitance are adjusted in an antenna tuner to match impedance. That affects SWR, not the ALC reading.
- D, Attenuator level: An attenuator reduces incoming receiver signal levels and has no role in setting transmit drive or ALC.