General Question G2E14
G2E: Digital mode operating procedures
What could be wrong if you cannot decode an RTTY or other FSK signal even though it is apparently tuned in properly?
- The mark and space frequencies may be reversed
- You may have selected the wrong baud rate
- You may be listening on the wrong sideband
- All these choices are correct (correct answer)
Correct answer: D, All these choices are correct
Explanation
An FSK signal can look properly tuned and still not decode. If mark and space are reversed, every bit comes out inverted. The wrong baud rate (amateur RTTY is usually 45.45 baud) makes the decoder sample at the wrong moments. The wrong sideband flips the audio tones, which also swaps mark and space. Any one of these three settings produces garbage text.
Why the other answers are wrong
- A, The mark and space frequencies may be reversed: Reversed mark and space is a real cause of failed decoding, but it isn't the only one; baud rate and sideband errors also prevent copy.
- B, You may have selected the wrong baud rate: A wrong baud rate does prevent decoding, but it is one of several possible causes rather than the only correct answer.
- C, You may be listening on the wrong sideband: Receiving on the wrong sideband inverts the tones and blocks decoding, but the other listed problems are equally valid causes.