General Question G3B03
G3B: Maximum Usable Frequency; Lowest Usable Frequency; short path and long path propagation; determining propagation conditions; ionospheric refraction
Which frequency will have the least attenuation for long-distance skip propagation?
- Just below the MUF (correct answer)
- Just above the LUF
- Just below the critical frequency
- Just above the critical frequency
Correct answer: A, Just below the MUF
Explanation
Absorption, mostly in the D region, decreases as frequency rises. The highest frequency that is still refracted back to Earth over the path therefore loses the least energy, and that frequency is just below the MUF. Above the MUF the signal escapes into space. Below it, absorption increases steadily as you approach the LUF.
Why the other answers are wrong
- B, Just above the LUF: Just above the LUF a signal barely survives absorption, because the LUF is defined by attenuation. This is the lossiest part of the usable range.
- C, Just below the critical frequency: The critical frequency applies to straight-up (vertical) incidence. Oblique long-distance paths can use much higher frequencies that are absorbed less.
- D, Just above the critical frequency: Being above the critical frequency says nothing about loss. The point of least attenuation is set by the MUF of the specific path.