General Question G3C08
G3C: Ionospheric regions; critical angle and frequency; HF scatter; near vertical incidence skywave (NVIS)
Why are HF scatter signals in the skip zone usually weak?
- Only a small part of the signal energy is scattered into the skip zone (correct answer)
- Signals are scattered from the magnetosphere, which is not a good reflector
- Propagation is via ground waves, which absorb most of the signal energy
- Propagation is via ducts in the F region, which absorb most of the energy
Correct answer: A, Only a small part of the signal energy is scattered into the skip zone
Explanation
Most of a skywave signal is refracted onward to land beyond the skip zone. Only a tiny fraction is scattered back or sideways by ionospheric irregularities and the ground into the skip zone. With so little energy taking that route, scatter signals heard there are usually weak.
Why the other answers are wrong
- B, Signals are scattered from the magnetosphere, which is not a good reflector: HF scatter comes from ionospheric irregularities and the ground, not from the magnetosphere.
- C, Propagation is via ground waves, which absorb most of the signal energy: The skip zone lies beyond ground-wave range, so ground waves are not the path that carries scatter signals into it.
- D, Propagation is via ducts in the F region, which absorb most of the energy: F-region ducting carries signals long distances with low loss; it is not what delivers weak signals into the skip zone.