General Question G4A01
G4A: Station configuration and operation
What is the purpose of the notch filter found on many HF transceivers?
- To restrict the transmitter voice bandwidth
- To reduce interference from carriers in the receiver passband (correct answer)
- To eliminate receiver interference from impulse noise sources
- To remove interfering splatter generated by signals on adjacent frequencies
Correct answer: B, To reduce interference from carriers in the receiver passband
Explanation
A notch filter is a very narrow rejection filter in the receiver. You tune it onto a steady carrier, such as a heterodyne whistle or tuning tone, that falls inside your passband. It removes that one interfering tone while leaving the rest of the wanted signal mostly untouched. Many radios offer an automatic notch that tracks such carriers.
Why the other answers are wrong
- A, To restrict the transmitter voice bandwidth: Transmit voice bandwidth is set by transmitter filtering and processing; the notch filter is a receiving aid.
- C, To eliminate receiver interference from impulse noise sources: Impulse noise such as ignition pops is broadband; it is handled by the noise blanker, not a narrow notch.
- D, To remove interfering splatter generated by signals on adjacent frequencies: Splatter is spread over a wide range of frequencies, so a narrow notch cannot remove it the way it removes a single carrier.