General Question G4A13
G4A: Station configuration and operation
What is the purpose of using a receive attenuator?
- To prevent receiver overload from strong incoming signals (correct answer)
- To reduce the transmitter power when driving a linear amplifier
- To reduce power consumption when operating from batteries
- To reduce excessive audio level on strong signals
Correct answer: A, To prevent receiver overload from strong incoming signals
Explanation
A receive attenuator inserts a fixed loss, such as 10 dB or 20 dB, ahead of the receiver front end. Very strong signals can overload the RF amplifier and mixer, causing desensing, intermodulation and false signals. Cutting all signal levels keeps the front end in its linear range.
Why the other answers are wrong
- B, To reduce the transmitter power when driving a linear amplifier: Exciter drive to a linear amplifier is set with the transmit power control, not with a receive attenuator.
- C, To reduce power consumption when operating from batteries: An attenuator is a passive loss in the signal path and saves essentially no battery current.
- D, To reduce excessive audio level on strong signals: Loud audio is handled by AGC and the volume control; the attenuator protects the RF front end from overload.