General Question G4B10
G4B: Tests and test equipment
Which of the following can be determined with a directional wattmeter?
- Standing wave ratio (correct answer)
- Antenna front-to-back ratio
- RF interference
- Radio wave propagation
Correct answer: A, Standing wave ratio
Explanation
A directional wattmeter measures forward and reflected power separately, and SWR follows from the two readings. SWR = (1 + √(Pr/Pf)) / (1 − √(Pr/Pf)). With 100 W forward and 4 W reflected, √0.04 = 0.2, so SWR = 1.2 / 0.8 = 1.5:1.
Why the other answers are wrong
- B, Antenna front-to-back ratio: Front-to-back ratio compares the radiated field off the front and back of an antenna. That requires field-strength measurements, not an in-line feed line meter.
- C, RF interference: RF interference is tracked down with receivers, sniffers or spectrum analyzers. A wattmeter only measures power traveling in the feed line.
- D, Radio wave propagation: Propagation depends on the ionosphere and the path, which you judge from signal reports and beacons. A feed line meter cannot measure it.