General Question G5B06
G5B: The decibel; current and voltage dividers; electrical power calculations; sine wave root-mean-square (RMS) values; PEP calculations
What is the PEP produced by 200 volts peak-to-peak across a 50-ohm dummy load?
- 1.4 watts
- 100 watts (correct answer)
- 353.5 watts
- 400 watts
Correct answer: B, 100 watts
Explanation
Convert to RMS before computing power. Peak = 200 V p-p / 2 = 100 V. RMS = 100 V x 0.707 = 70.7 V. PEP = Vrms² / R = (70.7 V)² / 50 Ω ≈ 5,000 / 50 = 100 W. PEP uses the RMS voltage at the crest of the envelope, not the raw peak-to-peak value.
Why the other answers are wrong
- A, 1.4 watts: 1.4 W comes from dividing 70.7 V by 50 Ω. That gives about 1.4 A of current, not power, because the voltage was never squared.
- C, 353.5 watts: 353.5 W doesn't follow from Vrms² / R. It misplaces the 0.707 factor instead of squaring the 70.7 V RMS value and dividing by 50 Ω.
- D, 400 watts: 400 W comes from mishandling the peak-to-peak conversion. Using a voltage larger than the true RMS value overstates the power.