General Question G5C05
G5C: Resistors, capacitors, and inductors in series and parallel; transformers
Why is the primary winding wire of a voltage step-up transformer usually a larger size than that of the secondary winding?
- To improve the coupling between the primary and secondary
- To accommodate the higher current of the primary (correct answer)
- To prevent parasitic oscillations due to resistive losses in the primary
- To ensure that the volume of the primary winding is equal to the volume of the secondary winding
Correct answer: B, To accommodate the higher current of the primary
Explanation
A transformer delivers about as much power out as it takes in, so P = E x I is roughly equal on both sides. A step-up transformer raises the voltage on its secondary, so the secondary current is lower. The low-voltage primary must therefore carry proportionally more current. Thicker wire on the primary lowers its resistance and the I²R heating that this higher current would otherwise cause.
Why the other answers are wrong
- A, To improve the coupling between the primary and secondary: Coupling depends on the core and how the windings are arranged, not on the wire gauge of the primary.
- C, To prevent parasitic oscillations due to resistive losses in the primary: Parasitic oscillations are a circuit-stability issue in amplifiers. They aren't the reason a transformer primary uses heavier wire.
- D, To ensure that the volume of the primary winding is equal to the volume of the secondary winding: Matching winding volumes is not a design goal. Wire size is chosen to carry each winding's current without excess heating.