General Question G6A09
G6A: Resistors; capacitors; inductors; rectifiers; solid-state diodes and transistors; vacuum tubes; batteries
Which of the following describes MOSFET construction?
- The gate is formed by a back-biased junction
- The gate is separated from the channel by a thin insulating layer (correct answer)
- The source is separated from the drain by a thin insulating layer
- The source is formed by depositing metal on silicon
Correct answer: B, The gate is separated from the channel by a thin insulating layer
Explanation
MOSFET stands for metal-oxide-semiconductor field-effect transistor. The gate electrode sits on a very thin insulating oxide layer, usually silicon dioxide, above the channel, so gate voltage controls the channel through an electric field with almost no gate current. This is why it is also called an insulated-gate FET, and why static discharge can puncture the oxide.
Why the other answers are wrong
- A, The gate is formed by a back-biased junction: A gate formed by a reverse-biased (back-biased) junction describes a JFET, not a MOSFET.
- C, The source is separated from the drain by a thin insulating layer: Source and drain are joined by the conducting channel, not separated by an insulator. The insulating layer lies between the gate and the channel.
- D, The source is formed by depositing metal on silicon: The source is a doped region of the semiconductor. The "metal" in MOSFET refers to the gate electrode, not the source.