General Question G6A12
G6A: Resistors; capacitors; inductors; rectifiers; solid-state diodes and transistors; vacuum tubes; batteries
What is the primary purpose of a screen grid in a vacuum tube?
- To reduce grid-to-plate capacitance (correct answer)
- To increase efficiency
- To increase the control grid resistance
- To decrease plate resistance
Correct answer: A, To reduce grid-to-plate capacitance
Explanation
The screen grid sits between the control grid and the plate. It is held at a fixed positive DC voltage and bypassed to RF ground, so it acts as an electrostatic shield. This greatly reduces grid-to-plate capacitance, which cuts unwanted feedback and the self-oscillation it can cause in an amplifier.
Why the other answers are wrong
- B, To increase efficiency: Any change in efficiency is a side effect. The screen's main job is shielding the control grid from the plate.
- C, To increase the control grid resistance: The screen grid has no role in setting the resistance of the control grid circuit.
- D, To decrease plate resistance: Adding a screen grid actually raises plate resistance, so tetrodes and pentodes have higher plate resistance than triodes, not lower.