General Question G7C01
G7C: Transceiver design; filters; oscillators; digital signal processing (DSP)
What circuit is used to select one of the sidebands from a balanced modulator?
- Carrier oscillator
- Filter (correct answer)
- IF amplifier
- RF amplifier
Correct answer: B, Filter
Explanation
A balanced modulator outputs both sidebands with the carrier suppressed. To make SSB, a sharp bandpass filter, typically a crystal or mechanical filter about 2.4 kHz wide, passes the wanted sideband and rejects the other. Choosing which side of the passband the carrier sits on selects upper or lower sideband.
Why the other answers are wrong
- A, Carrier oscillator: The carrier oscillator feeds the balanced modulator to generate the sidebands, but it cannot remove the unwanted one.
- C, IF amplifier: An IF amplifier boosts signal level at the intermediate frequency; it lacks the sharp selectivity needed to reject one sideband.
- D, RF amplifier: An RF amplifier increases signal strength and would amplify both sidebands equally rather than selecting one.