General Question G8C15
G8C: Digital emission modes
What does an FT8 signal report of +3 mean?
- The signal is 3 times the noise level of an equivalent SSB signal
- The signal is S3 (weak signals)
- The signal-to-noise ratio is equivalent to +3dB in a 2.5 kHz bandwidth (correct answer)
- The signal is 3 dB over S9
Correct answer: C, The signal-to-noise ratio is equivalent to +3dB in a 2.5 kHz bandwidth
Explanation
FT8 software reports signal-to-noise ratio in dB, scaled to a standard 2500 Hz (2.5 kHz) reference bandwidth, about the width of an SSB channel. A +3 report means the signal is 3 dB above the noise measured in that bandwidth. Because FT8 decodes far below the noise, most reports are negative, often down to about -20 dB.
Why the other answers are wrong
- A, The signal is 3 times the noise level of an equivalent SSB signal: The report is a decibel ratio, not a multiplier, and +3 dB is about twice the power, not three times the noise.
- B, The signal is S3 (weak signals): FT8 reports are not S-meter readings; they are SNR values in dB.
- D, The signal is 3 dB over S9: FT8 reports are not referenced to S9; "dB over S9" is an S-meter convention for strong analog signals.