General Question G9A04
G9A: Feed lines: characteristic impedance and attenuation; standing wave ratio (SWR) calculation, measurement, and effects; antenna feed point matching
What causes reflected power at an antenna’s feed point?
- Operating an antenna at its resonant frequency
- Using more transmitter power than the antenna can handle
- A difference between feed line impedance and antenna feed point impedance (correct answer)
- Feeding the antenna with unbalanced feed line
Correct answer: C, A difference between feed line impedance and antenna feed point impedance
Explanation
Power is reflected wherever a wave meets an impedance change. If the antenna's feed point impedance differs from the feed line's characteristic impedance, some energy is sent back toward the transmitter, and the SWR rises. For example, a 100-ohm load on 50-ohm coax gives an SWR of 2:1. The greater the mismatch, the more power is reflected.
Why the other answers are wrong
- A, Operating an antenna at its resonant frequency: At resonance the feed point is purely resistive, which usually gives a good match; resonance itself does not cause reflections.
- B, Using more transmitter power than the antenna can handle: Too much power can damage an antenna, but reflection comes from impedance mismatch, not from power level.
- D, Feeding the antenna with unbalanced feed line: Unbalanced feed on a balanced antenna can cause common-mode current, but reflected power comes from impedance mismatch.