General Question G9C11
G9C: Directional antennas
What is a beta or hairpin match?
- A shorted transmission line stub placed at the feed point of a Yagi antenna to provide impedance matching (correct answer)
- A 1/4 wavelength section of 75-ohm coax in series with the feed point of a Yagi to provide impedance matching
- A series capacitor selected to cancel the inductive reactance of a folded dipole antenna
- A section of 300-ohm twin-lead transmission line used to match a folded dipole antenna
Correct answer: A, A shorted transmission line stub placed at the feed point of a Yagi antenna to provide impedance matching
Explanation
A Yagi's driven element often has a low feed point impedance, well under 50 Ω. In a beta or hairpin match the split driven element is made slightly short so it looks capacitive. A shorted stub of parallel line, often bent into a U shape, is placed across the feed point and acts as an inductor. Together they form an L network that steps the impedance up to about 50 Ω.
Why the other answers are wrong
- B, A 1/4 wavelength section of 75-ohm coax in series with the feed point of a Yagi to provide impedance matching: This describes a quarter-wave matching transformer (Q-section), which is a different technique and is not called a beta or hairpin match.
- C, A series capacitor selected to cancel the inductive reactance of a folded dipole antenna: A series capacitor canceling reactance is part of a gamma match; the hairpin uses a shunt inductive stub instead.
- D, A section of 300-ohm twin-lead transmission line used to match a folded dipole antenna: 300 Ω twin-lead is the typical feed line or construction material for a folded dipole, not a hairpin matching stub on a Yagi.