Technician Question T0B08
T0B: Antenna safety: tower safety and grounding, installing antennas, antenna supports
Which is a proper grounding method for a tower?
- A single four-foot ground rod, driven into the ground no more than 12 inches from the base
- A ferrite-core RF choke connected between the tower and ground
- A connection between the tower base and a cold-water pipe
- Separate eight-foot ground rods for each tower leg, bonded to the tower and each other (correct answer)
Correct answer: D, Separate eight-foot ground rods for each tower leg, bonded to the tower and each other
Explanation
Lightning current must spread into the earth through a low-impedance path. Driving a separate 8-foot ground rod at each tower leg gives several deep contact points. Bonding the rods to the tower and to each other ties them into one system, so no dangerous voltage difference can build up between legs.
Why the other answers are wrong
- A, A single four-foot ground rod, driven into the ground no more than 12 inches from the base: A single 4-foot rod is too short and gives too little contact with the soil to safely carry lightning current.
- B, A ferrite-core RF choke connected between the tower and ground: An RF choke blocks fast currents, which is the opposite of what a lightning ground needs. Its impedance would force current elsewhere.
- C, A connection between the tower base and a cold-water pipe: Water pipes may contain plastic sections and are not an approved tower ground. Lightning current could also be carried into the house.