Technician Question T0C03
T0C: RF hazards: radiation exposure, proximity to antennas, recognized safe power levels, radiation types, duty cycle
How does the allowable power density for RF safety change if duty cycle changes from 100 percent to 50 percent?
- It increases by a factor of 3
- It decreases by 50 percent
- It increases by a factor of 2 (correct answer)
- There is no adjustment allowed for lower duty cycle
Correct answer: C, It increases by a factor of 2
Explanation
MPE limits apply to exposure averaged over time: 6 minutes for controlled and 30 minutes for uncontrolled environments. At a 50% duty cycle the transmitter is on half the time, so average exposure is half the on-air level. You may therefore have twice the power density while transmitting and still meet the same average: 1 ÷ 0.5 = 2.
Why the other answers are wrong
- A, It increases by a factor of 3: A factor of 3 would match a duty cycle of about 33 percent, not 50 percent.
- B, It decreases by 50 percent: This reverses the relationship: less time on the air allows more power density while transmitting, not less.
- D, There is no adjustment allowed for lower duty cycle: FCC exposure limits are averaged over time, so duty cycle is a recognized factor in an RF exposure evaluation.