Technician Question T1A06
T1A: Purpose and permissible use of the Amateur Radio Service; Operator/primary station license grant; Meanings of basic terms used in FCC rules; Interference; RACES rules; Phonetics; Frequency Coordinator; Beacon
On which of the following HF frequencies can automatically controlled amateur propagation beacons be found?
- Anywhere in the Technician portion of 10 meters
- Anywhere, if they are registered with the FCC
- In a specific portion of each of the HF Technician bands
- On ten meters, between 28.200 MHz and 28.300 MHz (correct answer)
Correct answer: D, On ten meters, between 28.200 MHz and 28.300 MHz
Explanation
Section 97.203(d) lists the segments where a beacon may be automatically controlled. The only HF segment on that list is 28.20-28.30 MHz on 10 meters. The other listed segments are on 6 m, 2 m, 1.25 m and 70 cm, plus the 33 cm and shorter bands. Tuning across 28.2-28.3 MHz and listening for beacons is a quick way to check whether 10 meters is open.
Why the other answers are wrong
- A, Anywhere in the Technician portion of 10 meters: Technicians may use 28.0-28.5 MHz, but automatically controlled beacons are limited to the narrower 28.20-28.30 MHz segment.
- B, Anywhere, if they are registered with the FCC: There is no FCC beacon registration that permits operation anywhere; the rule restricts automatic beacons to specific segments.
- C, In a specific portion of each of the HF Technician bands: Technicians have HF privileges on several bands, but 97.203(d) lists only one HF beacon segment, on 10 meters.
Rule: §97.203(d)