Technician Question T2A03
T2A: Station operation: choosing an operating frequency, calling another station, test transmissions; Band plans: calling frequencies, repeater offsets
What is a common repeater frequency offset in the 70-centimeter band?
- Plus or minus 5 MHz (correct answer)
- Plus or minus 600 kHz
- Plus or minus 500 kHz
- Plus or minus 1 MHz
Correct answer: A, Plus or minus 5 MHz
Explanation
The 70-centimeter band (420-450 MHz) is much wider than 2 meters, so its repeaters use a larger separation of 5 MHz between input and output. For example, a repeater transmitting on 444.500 MHz would listen on 449.500 MHz. The wider spacing also makes it easier to isolate the repeater's receiver from its own transmitter.
Why the other answers are wrong
- B, Plus or minus 600 kHz: 600 kHz is the standard offset on the 2-meter band, not 70 centimeters.
- C, Plus or minus 500 kHz: 500 kHz is far too narrow for normal 70-centimeter repeater spacing and is not the standard offset there.
- D, Plus or minus 1 MHz: 1 MHz is not the standard 70-centimeter offset; that band uses 5 MHz between repeater input and output.