Technician Question T2A07
T2A: Station operation: choosing an operating frequency, calling another station, test transmissions; Band plans: calling frequencies, repeater offsets
What does the term "repeater offset" mean?
- The difference between a repeater’s transmit and receive frequencies (correct answer)
- The repeater has a time delay to prevent interference
- The approximately half-second delay to allow for the “squelch tail” to be removed
- The fee charged by the repeater owner or club to provide for maintenance
Correct answer: A, The difference between a repeater’s transmit and receive frequencies
Explanation
A repeater receives on one frequency (its input) and retransmits on another (its output). The repeater offset is the difference between those two frequencies, such as 600 kHz on 2 meters or 5 MHz on 70 centimeters. Your radio must be set to the correct offset and direction to transmit on the repeater's input while listening on its output.
Why the other answers are wrong
- B, The repeater has a time delay to prevent interference: Offset refers to frequency separation, not time; repeaters don't use a timing delay to prevent interference.
- C, The approximately half-second delay to allow for the “squelch tail” to be removed: A squelch tail is the brief noise burst after a transmission ends; it has nothing to do with frequency offset.
- D, The fee charged by the repeater owner or club to provide for maintenance: Club dues or donations may help support a repeater, but "offset" is a frequency term, not a fee.