Technician Question T2B01
T2B: VHF/UHF operating practices: FM repeater, simplex, reverse splits; Access tones: CTCSS, DTMF; DMR operation; Resolving operating problems; Q signals
What is the purpose of the reverse function on a VHF/UHF transceiver?
- To reduce power output
- To increase power output
- To listen on a repeater’s input frequency (correct answer)
- To listen on a repeater’s output frequency
Correct answer: C, To listen on a repeater’s input frequency
Explanation
A repeater listens on its input frequency and retransmits on its output frequency. The reverse function swaps your radio's transmit and receive frequencies, so you hear the repeater's input directly. If you can copy the other station there, the two of you may be close enough to move to a simplex frequency and free up the repeater.
Why the other answers are wrong
- A, To reduce power output: Reverse changes frequencies, not power; transmit power is set by a separate high/low power control.
- B, To increase power output: Reverse has no effect on power output; it only swaps which frequency you transmit and receive on.
- D, To listen on a repeater’s output frequency: You already listen on the repeater's output during normal operation, so no special function is needed for that.