Technician Question T2B09
T2B: VHF/UHF operating practices: FM repeater, simplex, reverse splits; Access tones: CTCSS, DTMF; DMR operation; Resolving operating problems; Q signals
Why are simplex channels designated in the VHF/UHF band plans?
- So stations within range of each other can communicate without tying up a repeater (correct answer)
- For contest operation
- For working DX only
- So stations with simple transmitters can access the repeater without automated offset
Correct answer: A, So stations within range of each other can communicate without tying up a repeater
Explanation
Band plans set aside simplex channels such as 146.52 MHz so stations close enough to hear each other directly can talk without a repeater. This keeps the repeater free for stations that need its extra range, and the contact still works if the repeater goes down. If you can hear the other station directly, you should move to simplex.
Why the other answers are wrong
- B, For contest operation: Contests do use VHF/UHF, often in the weak-signal SSB and CW segments, but that is not why FM simplex channels are set aside.
- C, For working DX only: Simplex channels serve ordinary local contacts; long-distance DX on these bands mostly uses SSB, CW or digital modes in their own segments.
- D, So stations with simple transmitters can access the repeater without automated offset: Simplex means transmitting and receiving on the same frequency with no repeater involved, so it has nothing to do with repeater offsets.