Technician Question T2B12
T2B: VHF/UHF operating practices: FM repeater, simplex, reverse splits; Access tones: CTCSS, DTMF; DMR operation; Resolving operating problems; Q signals
What is the digital color code used on DMR repeater systems?
- An access code which must be programmed into a DMR transmitter to access a specific repeater (correct answer)
- A code which automatically programs the repeater offset to a frequency chosen by the user
- A code which identifies the specific CODEC being used so that the repeater can properly decode the audio
- A code transmitted by the repeater to indicate health and status of the equipment
Correct answer: A, An access code which must be programmed into a DMR transmitter to access a specific repeater
Explanation
A DMR color code is a number from 0 to 15 that each repeater uses. Your radio's channel must carry the same color code, or the repeater will ignore your transmission. It works a lot like a CTCSS tone on an analog repeater. Nearby DMR repeaters on the same frequency can then be told apart. You find the code in the repeater's listing and program it into your radio with the frequency and time slot.
Why the other answers are wrong
- B, A code which automatically programs the repeater offset to a frequency chosen by the user: Repeater offset is a fixed frequency split programmed separately into the channel; the color code has no effect on frequencies.
- C, A code which identifies the specific CODEC being used so that the repeater can properly decode the audio: DMR uses one standard voice codec (AMBE+2), so there is nothing for a code to identify; the color code only controls repeater access.
- D, A code transmitted by the repeater to indicate health and status of the equipment: Health and status reporting is a separate repeater function; the color code is an access value that users must match to get in.