Technician Question T3A05
T3A: Radio wave characteristics: how a radio signal travels, fading, multipath, polarization, wavelength vs absorption; Antenna orientation
When using a directional antenna, how might your station be able to communicate with a distant repeater if buildings or obstructions are blocking the direct line of sight path?
- Change from vertical to horizontal polarization
- Try to find a path that reflects signals to the repeater (correct answer)
- Try the long path
- Increase the antenna SWR
Correct answer: B, Try to find a path that reflects signals to the repeater
Explanation
VHF and UHF signals reflect well off buildings, hillsides and other large surfaces. When the direct path to a repeater is blocked, you can aim a directional antenna at a reflecting surface instead of straight at the repeater. The reflected signal may reach the repeater even though you have no line of sight to it.
Why the other answers are wrong
- A, Change from vertical to horizontal polarization: Repeaters normally use vertical polarization, so switching to horizontal adds cross-polarization loss and does nothing about the obstruction.
- C, Try the long path: Long path is an HF skywave technique that goes the long way around the Earth; it does not apply to reaching a local VHF or UHF repeater.
- D, Increase the antenna SWR: Raising SWR only wastes power and can stress the transmitter; it never helps a signal get around an obstruction.