Technician Question T4A11

T4A: Station setup: connecting a microphone, RF power meter, a power source, a computer, digital equipment, an SWR meter; bonding; Mobile radio installation

Where should the negative power return of a mobile transceiver be connected in a vehicle?

  1. At the 12-volt battery chassis ground (correct answer)
  2. To the shell of the power connector
  3. To any metal part of the vehicle
  4. Through the transceiver’s mounting bracket

Correct answer: A, At the 12-volt battery chassis ground

Explanation

A mobile rig draws high current, so its negative lead should go straight to the battery's negative terminal, or to the chassis ground point right beside the battery. That gives the return current a short, solid path. Body panels and bolted joints can have resistance that causes voltage drops. They also carry return currents from the alternator, ignition and other systems, which can put noise into the radio.

Why the other answers are wrong

Previous: T4A10 · All Technician questions · Next: T4A12

Practice T4 Amateur Radio Practices