Technician Question T4B03
T4B: Operating controls: frequency tuning, use of filters, squelch function, AGC, memory channels, noise blanker, microphone gain, receiver incremental tuning (RIT), bandwidth selection, scanning function; Digital transceiver configuration; DMR code plugs and talk groups
How is squelch adjusted so that a weak FM signal can be heard?
- Set the squelch threshold so that receiver output audio is on all the time (correct answer)
- Turn up the audio level until it overcomes the squelch threshold
- Turn on the anti-squelch function
- Enable squelch enhancement
Correct answer: A, Set the squelch threshold so that receiver output audio is on all the time
Explanation
Squelch mutes the receiver's audio until the incoming signal rises above a set threshold. A weak FM signal may never cross that threshold, so you would hear nothing. Turn the squelch down, or fully open, so audio passes all the time. You will hear background noise, but the weak signal will come through with it.
Why the other answers are wrong
- B, Turn up the audio level until it overcomes the squelch threshold: Raising the volume only makes audio louder once squelch opens; it cannot open a squelch that is keeping the audio muted.
- C, Turn on the anti-squelch function: There is no standard anti-squelch function; you simply lower or open the squelch control.
- D, Enable squelch enhancement: Squelch enhancement is not a standard control; enabling more squelch would make a weak signal less likely to be heard.